Nothing Screen on Computer

Step two. In the event you have recently installed a new video card and your process worked fine before remove it from the process and confirm it is compatible together with your computer. In the event you have an onboard video card remove the AGP or PCI card and try the on board video. In the event you have not installed a new video card recently proceed to step four.


Step one. Double check that your computer and monitor are plugged in to a known nice power outlet. Confirm that all the cables are properly connected.


Step three. Read the installation instructions if this is a new video card. Sometimes the program needs to be installed first before the video card is installed in the process


Step two. If your systemposts fine and then the video becomes distorted when windows boots up, try to boot in to safe mode by pressing F8 and then select safe mode with networking and try to update the drivers.


Computer has no power


Step four. When your computer is turnedon are you getting any power. If not view this article





Step five. Make positive that the proper voltage is set on the back of the computer. It ought to read 110. If not then flip it to 110. If no switch is present then by default your power supply ought to be set to 110 for the US.


Step 6. Make positive your speakers are connected and turned on. Turn on your computer and try to listen to any beeps coming from your computer. In the event you here short beep that means your process posted fine and it is most likely a monitor issues. In the event you here other beep sequences then check out the manufacturers web-site or give them a call to find out what that sequence means. You can also look up common beep code errors here www.xmission.com


Step five. If your process turns on view the front of the case for a yellow or amber light. In the event you see this light then chances are your hard drive may not be fully seated and this cancause your process to show no video.


Step 7. Try a known nice monitor. If this does not work try a differ netvideo card.


Step 8. Remove all devices from the computer except what is need for the computer to post. Leave the hard drive, processor heat sinkand video. Disconnect all other devices such as Cd/DVD players, sound cards, modems. In the event you have an onboard video card remove the PCI or AGP card and use the integrated video port.


Step ten. Try a different processor.


Step 9. Try a different processor and or hard drive.


Step 11. Try a different motherboard.


Step 12. If this is a home built process confirm that all the hardware is compatible.


In the event you do not have any of these check parts try to find another known nice computer and try your parts in there